We sure do!
You will need the EcoHitch Invisi Trailer Hitch Receiver # EH39FR which was designed specifically for the 2020 Tesla Model Y. This trailer hitch has 2" receiver tube with a maximum tongue weight rating of 350lbs, and a maximum trailer weight rating of 3500lbs.
The EcoHitch # EH39FR would be great for bike racks like the Thule Hitching Post Pro # TH934XTR, cargo carriers, or even a ball mount for light duty towing.
I included a video of the # TH934XTR and a picture of the... view full answer...
I definitely have a recommendation for you to add both a trailer hitch receiver and wiring for your 2021 Tesla Model Y so you can haul your Wave Runner. The hitch I recommend is from Draw-Tite and the wiring harness from Tekonsha, with the correct fits for your '21 Model Y being the following:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT58MR
- ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT
I really like the Draw-Tite due to its superior strength, as it has a 3,500 lb... view full answer...
The Kuat Piston Pro X Bike Rack # KU98VR is a great choice in a bike rack and you will need both the hitch and wiring to utilize the integrated lights on the rack.
I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # DT58MR and the Tekonsha Wiring Harness # 119250KIT for your 2022 Tesla Model Y. The Draw-Tite is a solid choice that remains hidden behind the rear bumper fascia and the wire harness will splice into your OEM wiring.
One of the nice things about the Piston Pro... view full answer...
Yes, the Thule Apex XT hanging bike rack part # TH9025XT can be used on your 2021 Tesla Model Y as long as you have a hitch installed on the vehicle like the Draw Tite part # DT58MR. view full answer...
The only time I would recommend the Saris Bones Hitch 4 Bike Rack # SA884 over the Thule Apex XT 4 Bike Rack # TH9025XT is if the weight of the bike rack was the only factor since the Bones weighs 22 lbs while the Apex XT weighs 35 lbs.
The Apex XT has integrated bike and rack locks as well as an anti-rattle knob which means it's a tool-free installation and you don't have to remember to grab the locks before you leave. The cradles are also spaced apart 7" center to center which is more... view full answer...
The EcoHitch # EH39FR for your 2022 Tesla Model Y does provide a much easier solution for removal of the appearance panel for access to the hitch opening compared to the Draw Tite # DT58MR.
If you fast-forward to the 25 second mark of the attached install video for the Draw Tite Hitch # DT58MR you can see what it takes to remove the rear trim piece that covers the hitch opening. We had to use a trim panel removal tool so if you were concerned about ease of removal and install I would rather... view full answer...
For a trailer wiring harness 4-way kit that fits your 2022 Tesla Model Y the correct fit is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT.
If you needed a trailer hitch too the EcoHitch part # EH39FR would be a really great option. Once installed it fits behind the rear access panel of your rear bumper so it will be totally hidden when not in use. view full answer...
Witch a hitch installed on your 2020 Tesla Model Y like the EcoHitch part # EH39FR the best bike rack really comes down to what you need from the bike rack. Which that comes down to how many bikes you plan to carry and what kind of bikes they are. One of my favorites is the Thule T2 part # TH83JV which is very easy to load, only touches the bikes at the tires, and can fold up when not in use. view full answer...
I attached a link to a page that has all of the tire chains we offer for the tire size 315/75-16 that you have on your 2002 Ford F-350 but the ones I really like are the Konig chains part # KON74FR which are easy to install, provide great traction, and will last a long time. They do cost more so if you wanted somethin that is more budget friendly I would go with the Titan chains part # TC2337. These will provide about as good of traction but they won't last quite as long or install quite... view full answer...
While there is no assurance that there will be no damage to the wheels when using the Konig Self-Tensioning, Low-Profile Snow Tire Chains part # TH2004205117 I can tell you that when installed and adjusted properly I have not seen any issues with this. These are as you said a confirmed fit for your 2020 Tesla Model Y with the 255/40R20 tires.
On the other hand if the chains are not properly installed or adjusted they could move around enough to cause you issues. If you ensure you have... view full answer...
You'd potentially be modifying the Thule EasyFold XT # TH903202 to the point of voiding the warranty but you could use the LED kit part # 98174LED to add the lights and then use the bracket # BK70BB and you'd be set since it sounds like your vehicle has a 4-way installed on it already. view full answer...
The only version of the Kuat NV we carry # NV22B is the one that comes with the hitch lock that has it's lock core perpendicular to the hitch pin like you are wanting. view full answer...
I checked with Yakima and their FatCat Evo part # Y03095 is a confirmed fit for the OEM crossbars of your 2023 Tesla Model Y. It has a spacer setup built into it that allows you to raise one side to accommodate tall bindings like it sounds like you have. Overall the rack is very easy to install/remove and load/unload. view full answer...
We have all of those options for your 2021 Tesla Model Y!
Floor Mats
Front - # WT97QJ
2nd Row - # WT58AV
Trunk Mat 5 Passenger - # WT37AV
Trunk Mat 7 Passenger - # WT22NJ
These are all WeatherTech mats because even though they are on the high-end of floor mats, they are on the high-end for a reason. These are custom-fit for your Model Y and they fit like a glove to the contours of your floorboard. They also have higher edges so they create a type of "bowl" which keeps any debris or liquids... view full answer...
The ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will be the best option for a no-splice wiring harness for your 2021 Tesla Model Y. The kit will completely bypass the factory wiring. It uses sensors that clamp on to the factory wiring and detect electrical current, so no cutting or splicing will be needed.
I have linked our install video below if you want to take a closer look. view full answer...
Yes with the Draw Tite part # EH39FR installed on your 2021 Tesla Model Y you'd be able to reinstall the rear appearance panel so that the hitch would be invisible when not in use. view full answer...
I do have a great bike rack recommendation that's not only functional but it also compliments the sleek look of your 2023 Tesla Model Y:
- Kuat NV 2.0 Base Bike Rack # BA22B
Kuat has done amazing work with this rack with how easy it is to use and the types of bikes it can accommodate as it can handle up to 60 lb bikes with up to 3.0" wide tires (5.0" tires with the Phat Bike Adapter Kit # APBK). We even have the Access Ramp # ANVBRB as an add-on to help make loading and unloading your... view full answer...
For your 2021 Tesla Model Y that has tire sizes P255/35R21 for the front and P275/35R21 for the rear I would recommend the Konig K-Summit chains part # TH02230K56 for the rear and part # TH02230K55 for the front.
What's unique about these chains is that they do not require any inner tire sidewall clearance, they install easily, provide great traction, have rim protection, and will last a long time so they are by far your best option. view full answer...
For your Specialized Como SL 5.0 bike we have a lovely option for a 1-bike rack that is both easy to use and lightweight, the Kuat Transfer:
- Kuat Transfer V2 Bike Rack for 1 Bike # KU64FR
The Transfer V2 # KU64FR is just 26 lbs which is really light for a rack, but still has a 60 lb capacity. And ease of use is one of its best features as all you do is slide the rack in your hitch, insert the hitch pin, and then use the included Allen wrench to tighten the hitch cam at the back of the rack. view full answer...
Go To Results